• Discharge-lamp Moving Head Lights

    Odio vivamus ac malesuada parturient laoreet lorem.

HOME › LED-based Moving Head Lights

The main area of ​​application of professional Discharge-lamp Moving Head Lights is discos and nightclubs, less often theaters and restaurants.

Scanner

A light device used for controlled spatial dynamic movement of a light beam, which is a color image of a pattern.

The main distinguishing features of scanners are:

  • Creation of a clear beam of light with the possibility of its precise positioning in space using a mirror scanning in two planes at the exit of the beam,
  • Multi-channel control of the functionality of the device by the DMX512 signal. The DMX512 protocol is well protected from interference and allows you to control scanners over a long distance.

The scanner optics consists of two controllable lenses, which are controlled by two motors to move in the vertical and horizontal planes, the light source is located at the very end of the scanner. The movement of the light beam is fast enough because for this it is only necessary to slightly turn the mirror inside the device.

Professional scanners are characterized by:

  • Power and type of lamp used
  • The number of metal and / or dichroic stencils (gobos), the ability to rotate and overlay them.
  • The number of colors to create (including bicolor and rainbow effects).
  • The presence of prisms with the ability to rotate, iris, dimmer, various corrective filters, controlled focus, frost effects, strobe with adjustable frequency, etc.

Discharge-lamp Moving Head Lights

Theater lights are used to illuminate plays, concerts and other live performances, as well as television studios and soundstages. More and more theater lighting is used in places other than the stage, such as restaurants, churches, nightclubs or exhibitions.

Stage Lights can be freely classified in two ways:

Fixed or Moving Fixed – does not require staying in place and requires the operator to manually focus the beam.

Moving fixtures are electronically controlled and reprogrammed for a variety of effects, including movement, color change, and rotation or image change.

There are several broadly defined types of stage fixtures. They are used alone or in combination with each other and with dimming and / or control components to create any effect imaginable.

Ellipsoids:

Fixed focus spotlights that produce a sharp or soft edge beam of high intensity. Starting in size with different focal lengths. These fixtures are also used for templated projection.

Fresnel Spotlights:

Used primarily where a controlled soft edge light source is required. Fresnel is commonly used for bottom, back and side lighting. The beam width changes as the lamp is moved closer to or further from the lens.

Edge light:

Discharge-lamp Moving Head Lights with separate spotlights. Designed to wash light across the width of the stage. They are available wired for three or four circuit operation for separation or mixing. Typically used for backdrop lighting or cycloramas.

Point Light:

Mounts on a swing base and is used in any room where control of an intense light beam is required to follow the performer. A light beam is similar to an ellipsoid, but with controls to shape the beam and change color.

Moving Lights:

There is a huge variety of lights available to move, rotate, ripple and color or change pattern effects. These devices made with moving heads and / or clamps that move the entire body of the fixture, or with a moving mirror that redirects light.

Fill Light:

Similar to border light, with a special reflector, creates a very wide, asymmetrical soft field of light, used to illuminate the background from top to bottom. These lights are available from one to four cells, used either from the ground or from fly tubes.

Parabolic Aluminized Reflector:

This is an inexpensive, highly flexible luminaire designed for a wide variety of setups. They emit a rectangular soft beam of light, typically used to create intense, diffuse light.

LED luminaires:

LEDs last longer, require less maintenance, have cleaner light and are extremely economical to operate. LEDs are used in light fixtures, tiles, immersion elements, spotlights, color mixers and video projectors.

Backlight:

High intensity lighting fixtures that erase near ultraviolet light and cause reflective light and especially on treated surfaces become fluorescent and dark or absorbent ones become invisible.

Laser show equipment for nightclubs

Club lasers are an exciting and unique way to offer a special laser lighting effect for any club.

These lasers come in a variety of wattage and color configurations from red, green, and blue to full-color RGB, which can give you an amazing laser light show over your crowd or the ability to animate graphically and textually.

You can control lasers in active sound mode, DMX, ILDA or FB4 (Ethernet) – this will allow you to put on a stunning laser light show and get the affects you really want from club lasers.

But remember that for the best laser affects you will need a fog machine. Such Discharge-lamp Moving Head Lights will create the best atmosphere in the nightclub, which your visitors will remember for a long time.

Stage lighting equipment

Stage lights are used to illuminate plays, concerts and other live performances, as well as television studios and soundstages. More and more stage lighting is used in places other than the stage, such as restaurants, churches, nightclubs or exhibitions.