As a musician or mobile DJ, you probably know that lighting is essential to create an unforgettable mood and atmosphere. But what type of moving head led stage lights to choose for your event? PAR projectors, blinders, strobes, and moonflower and derby effects, moving heads, scanners, lasers, halogen lamps, LEDs…

The choice is so vast that finding the right model for your needs often becomes difficult. In this blog, our guest blogger Bo will guide you through this ocean of possibilities!

Foreword

• In this blog, I will focus on stage lighting suitable for small to medium-sized party, club, or concert use.
• In order to avoid frequent repetitions of the term ‘lamp’, I will also use the words ‘frame’ and ‘projector’. These two terms refer to the lamp housing, but are often used to refer to the device in general.

Types of stage moving head led stage lights

For me, stage lights can be divided into the following groups:

Static lighting (no moving parts)

• PAR headlamps
• Blinders and strobes

Light effects

• Traditional play of light
• Lyres and scanners
• Lasers

Static moving head led stage lights

Conventional PAR (halogen) floodlights

Until a few years ago, PAR projectors were widely used in nightclubs. Today these have been replaced by moving head led stage lights, but they have not totally disappeared thanks to a few obvious advantages.

Indeed, in addition to being more affordable, PAR projectors offer a continuous dimming of up to 1% of the light output, which is often difficult to achieve for LEDs. As for the drawbacks, PARs convert around 3.5% of their electrical power into light.

The rest is turned into heat, which can be problematic in spaces not suited to high temperatures, or when working with limited power. In addition, they display a relatively short lifespan compared to LEDs. APAR halogen has a lifespan of around 1000 hours, while an LED can reach 50,000 hours. Last point: colored lighting requires the use of color filters, which reduces brightness.

LED ‘PAR’ floodlights

The word ‘PAR’ is in quotes because the term LED PAR is not quite correct. The word ‘PAR’ refers to PAR Can, a term rather used to designate the frame, or the housing of the lamp. The technique and frame of an LED PAR bear very little resemblance to that of a traditional halogen PAR.

However, the term LED PAR has entered so much common vocabulary that I will continue to use it to avoid confusion. The moving head led stage lights is also the reason for the disappearance of halogen PAR projectors. Here are some important advantages of LED PARs over halogen PARs:

• They are effective. The heat loss relative to the brightness is negligible.
• They benefit from a compact design.
• They are quite robust. A halogen PAR has a large glass lamp, as well as a filament that can easily break due to shocks.
• You have a lot of colors in one device.
• They are DMX compatible, so you won’t need any external dimmers.
• They do not generate heat and can therefore be placed on the ground without having to worry about fires.

Individual LEDs vs moving head led stage lights

There are several types of LED PARs: those with individual colored LEDs (= the most economical solution) and those with multi-LED chips. It is capable of creating multiple colors.

The RGBA chips, on the other hand, can provide warm white light through the amber LED.

You can recognize an individual LED spotlight by its large number of small lamps (right). A multi-LED chip fixture only offers a small number of larger lamps (left). As you can see, the latter produces a smoother color mix.

How to mix moving head led stage lights?

When you mix a white color with RGB LEDs, you get red, green, and blue shadows. This is because the individual colors come from different places and therefore fall on the illuminated object from different angles. This can be annoying when used in theaters or for architectural lighting of a wall with an uneven surface. You will not face this problem when using multi- moving head led stage lights, since this one mixes all the colors in the same place. My conclusion, therefore, is that the individual LED fixtures are perfectly suited for small parties. Multi-LED chip projectors are ideal for rentals, weddings and concerts.

LED bars vs moving head led stage lights

The only difference between an LED PAR and an LED bar is the construction of the frame. Due to its shape, an LED bar provides a wider distribution of light, which makes it ideally suited for lighting surfaces.

I like to hang the LED bars in an upright position; the space between the different LEDs creates an effect pleasing to the eye. It allow particularly precise pixel mapping, allowing you to drive each LED chip individually. So you can, for example, adjust the color and degree of dimming for each of the LEDs. This is not possible for LED PARs, where all chips do exactly the same.

Traditional play of light

These plays of light make it possible to fill a space with moving lights. The most famous type of effect is the ‘ derby ‘. This device consists of a set of moving lights hidden behind several rows of lenses. The moving head led stage lights is one example.

A derby effect is the ideal starting point for those new to the subject. Versatile, derby can also replace mirror balls – difficult to assemble as a traveling DJ, for example – during a slow dance. You only have to select slow moving head led stage lights rotation via DMX to fill the room with small, slowly moving white squares.

Lyres

The lyre is a lamp that is used in particular at festivals and large-scale parties. It is equipped with a mobile head capable of moving in all directions and projecting gobos and colors. We separate three main families: spot, beam and wash. There are also hybrid models that combine all three of these effects, but they will not be covered in this blog due to the high price tag.

There is a diverse range of light shows to the point where the choice sometimes becomes difficult, especially for beginners. To help you navigate the various moving head light china effects we offer, we’ve put together this buying guide. Your question is not answered? Please do not hesitate to contact us!

1. What is a moving head light china effect?

The play of light can be divided into three main categories: light effects, spot projectors and wash projectors. These groups can be further subdivided into light shows with or without DMX (see question 3). Most light shows use energy efficient LEDs (see question 2).

The lighting effects using multiple beams and movements to create a certain effect. They are used in particular to set the mood during a concert or a show, and are not suitable for lighting a person, an object or a place. The light effects come in various forms, such as moonflower effects, gobo projectors or even derby effects.

What are counter moving head light china effects?

In addition, there are the so-called “centerpiece” effects such as, for example, lyres, which are essential in light shows. There are also effects using mirrors, think for example of scanners and mirror balls. Another popular moving head light china effect is the laser.

Note that each of these light shows are grouped in a separate category. So you won’t find them in LED effects!

• LED effects
• What is the best lyre?
• What is the best laser?
• LED scanners
• Mirror balls
• What is an LED effect?

2. What is the advantage of LED light?

Compared to traditional halogen lamps (you will find an example on the right side of the picture) and discharge lamps, LED lamps (on the left side of the picture) are significantly more energy efficient and have a lifespan of longer life.

In addition, they produce less ambient heat, which makes life for artists on stage much more pleasant. Another interesting advantage: LED light sources are capable of producing light of different colors.

Most LED effects consist of three diodes:

• one red
• one green
• and one blue

Thus allowing colored highlights with almost endless possibilities of variation. Finally, note that LED lamps are easy to adjust in intensity and that they are clearly visible in daylight,

• LED effects
• Light effects
• All LED effects
• Lighting & Special Effects

What is the advantage of moving head light china?

3. What is DMX?

DMX compatible light shows are also called intelligent lighting systems. In short, DMX is a protocol mainly used to control lighting and effects (LED) from a distance. DMX moving head light china is particularly useful when you are going to use lights with a wide choice of setting possibilities.

You can program your various devices in detail and have the effects match the rhythm of the music or trigger them at a specific time. Note that you will need a DMX controller to control the lamps and DMX cables to connect them to the controller.

How to control dmx light?

There are several possibilities for controlling DMX lights, but a hardware controller is the tool of choice if you are using one or more fixtures. This is because of its intuitiveness. To tackle more complex applications, you will need more flexibility. The software solution (DMX interface + software) is then the best option. In addition, it is more economical!

Most light shows can also be used stand – alone, i.e. without DMX. In this case, you simply select one of the internal programs of the device. Note that with this method, you have less control over the various functions.

4. What type of LED effect is right for me?

Before you start buying an moving head light china effect, the most important thing is to ask yourself the right questions:

What atmosphere do you want to create? Enthusiastic and vibrant or intimate and reserved? Dramatic? Mysterious, perhaps?

• In what type of place will the event take place?
• Is your event taking place indoors or outdoors?
• Is it easy to access electricity?

Who will take care of the installation and control of the lighting? If you want to do this yourself, it is important to consider factors such as remote control and programming sequences.

5. What material do I need to install my moving head light china effects?

When installing your lights, you will need materials that are both sturdy and flexible to ensure a secure attachment at all times. Note that a suspension (on the ceiling, on a light portico or on a truss structure, for example) allows the play of light to cover a larger area. In addition, this method prevents accidental physical moving head light china damage.

The hooks G (mounted on a T-bar or a truss structure) and the safety wire are indispensable for the suspension and fixing of most lighting. The only exceptions are the simple light effects that can be placed on any flat surface such as a table.

• G and C hooks
• Safety slings
• Lighting stands
• T-bars
• Light gates
• Truss

6. What cables do I need to connect my LED effects?

Each light effect needs its own power cable. This is often included with the product. In some cases, you will need an extension cable to access the electricity.

If you opt for DMX control, you are going to need a DMX cable for each light effect. As the DMX devices are connected in series, you only need one extra-long cable to connect everything to the DMX controller. The DMX connection can be done using standard 3-pin XLR cables.

Which is the best cable for moving head light china?

For professional applications, it is recommended to use dedicated XLR cables for DMX, which are a bit more expensive but much safer than XLR cords designed for transmitting audio signals. Their 110 ohm impedance allows them to transmit a large number of signals at the same time.

Tip: It’s always a good idea to bring extra cables to an event or show in case of faults or if you need extra-long cables.

7. Do I need anything else?

A play of moving head light china can give a very nice effect to a dark room. Be aware, however, that the beams can be sublimated by a smoke machine!

As a novice, it may be a good idea to go for a beginner’s pack. These are sets with everything you need, offered at a great price.

There are two kinds of lyre: led lyres and lamp lyres, which are equipped with discharge lamp. These lamp lyres are traditional lyres. Moving head light suppliers use it with mainly common to project intense white light similar to daylight.

Our moving heads are equipped with LED bulbs because, in addition to being very powerful, they consume little energy for a prolonged lifespan: count around 30,000 hours of use.

 What is a led lyre?

Wash, Spot and Beam lyres

In the moving head light suppliers, you will find 3 main families. The advantage of these lyre families? This is because they meet specific needs and do not offer the same result! In short, a choice is to be made according to your lighting requirements.

To put it simply, the Beam lyre offers the narrowest beam, the Spot lyre allows a fairly precise beam, and the Wash lyre allows scanning with common light.

Zoom on the Spot lyre: moving head light suppliers

Spot type moving heads can get all possible hues from a number of gobos. Usually equipped with a gobo wheel, they are therefore perfectly suited to the use of gobos. Indeed, the light beam is perfect for the use and diffusion of colored patterns on surfaces

• Medium sized beam, a little wider than that of the lyre beam
• Ideal for lighting a show or concert hall

Integrate an LED moving head in your lighting

Whether you are an amateur or professional DJ, it is not always easy to know where to place your lighting. In this new part, we will see together how to properly install and configure an LED moving head.

The installation of your LED moving head

Moving head light suppliers are easy to use because they have Plug & Play functionality. You just have to plug your Beam, Spot or Wash lyre into an AC outlet to create the most perfect effects. LED moving heads are easy to connect in series because they come with an input and an output: this avoids the hassle of cables and better control your moving heads in your lighting installation.

How to position an LED moving head?

In this part, we will see together how to position the LED moving head in your installation. Indeed, this point is important because it will allow the realization of unique effects. In itself, it adapts perfectly to all your installations and even the most complex:

• On the ceiling, head down
• Halfway up, on stage structure

On the ground, head up

Depending on your needs, robotic projectors have a mounting bracket included allowing them to be positioned on walls, ceilings or on party bars. The head-down positioning allows you to diffuse your lighting effects on the stage or on the public! It is for example ideal for a lyre Wash which will be able to sweep the whole of the room. Be sure to add a safety cable to prevent the lyre from falling on the stage at the risk of injuring someone.

If you do not want to hang your moving head light suppliers, you can of course place it on the ground or on a flat surface. The positioning of your LED moving head has a real impact on your light show and is an essential point to take into account when setting up your overall equipment.

Are you hesitating between the ceiling and the floor? Don’t panic, the LED moving lights can also be positioned halfway up on a stage structure! The advantage of this positioning is that your lyre projects beams of light on the floor and ceiling, ideal for creating a unique atmosphere in an entire room.

How to control an LED moving head?

To control your LED lyre, there are two schools: amateur DJs who want easy and quick control, and professional DJs who want to create unique atmospheres each evening.

If your heart is swinging between automatic mode and DMX mode, here is some information to help you make up your mind.

Moving head light suppliers Auto mode for easy control

Have you just purchased an LED moving head and want to set it up to organize an impressive light show? Nothing’s easier! The Beam lyre, the Spot lyre or the Wash lyre has an auto mode for automatic mode. Its operation is very simple; because it is enough just to press a button.

Automatically therefore, your lyre will move to the rhythm of your music in order to offer a personalized light show. Do you have several lyres? Do you want to control your entire lighting installation? No worries, with the master / slave functionality!

Define the “conductor” lyre beforehand which will set the pace for the rest of your LED projectors. Thus, your LED moving heads will articulate collectively for a personalized and unique result.

How do moving head light suppliers control projectors?

The manager, with his DMX board, will be able to individually control your LED projectors to the rhythm of your music. This technique is ideal if you want to organize a live show, where light and sound comes together for a stunning result.

What are the benefits of an LED moving head?

As we could see together, the robotic projector offers breathtaking light effects to create a unique atmosphere from A to Z. Whether you choose a Spot lyre, a Wash lyre, a Beam lyre or even all three, each offers a high quality result.

A well-done installation allows for a breathtaking light show. Stage lighting makes all the difference at concerts and events.

Are you an amateur DJ and want to organize a birthday party? Moving head light suppliers allow the projection of gobos on the floor and walls, sweeping effects over the entire room, the diffusion of beams of various sizes …

Sound Equipment Tip – combine an effects machine with a robotic projector

Have you chosen your LED moving heads, their location and their connection? We know a tip that will make all the difference during your parties and events. Quite simply: add an effect machine to your equipment!

Conclusion

All moving head light suppliers will tell you, to enhance your lighting effects, integrate a smoke machine into your installation! Why? To create an exceptional visual experience, the effect machine will create what is called an atmospheric effect. As you fill the room with smoke, light will reflect off the smoke particles. This is called a 3D light effect.

Here are three components that will influence the way rgb laser spider moving head light behaves. We are talking about direction, shape and quality.

Direction

This is determined by the angle and placement. This can be:

Zenithal (above the actor’s head)

It is often used to give a dramatic effect.

Front

It is an illuminating the actor’s face in its entirety. But if we use it in scenarios it can stain the background with the shadow. That is why its use is limited to television, film and photography sets. In concert or theater stages, it is recommended to use the high front.

What is front rgb laser spider moving head light?

It is a high frontal that is placed in front of the actor. But always taking into account that the rgb laser spider moving head light beam has to hit the face. It comes at an angle of 45 degrees with respect to the line of sight.

Candileja

They are rgb laser spider moving head light placed on the ground in front of the actor. They are also called low frontal. It is often used to complement other lights in order to soften the contrasts in the actors’ faces.

Backlighting

It stands just behind the actor and encompasses his silhouette. Artificial fog is often used to give the effect that something supernatural or amazing is happening on stage.

High backlight, located at the same height and distance as the high front. This helps to separate the figure from the background, thus achieving depth.

Side of rgb laser spider moving head light

It is placed on the side leaving only one of the actor’s sides visible, either on the right or left side.

High side

The rgb laser spider moving head light hits the actor from one side at the same angle as the high front. It marks more the body and the face, with which it is possible to give three-dimensionality.

Shape and quality

Other aspects that we have to take into account when arranging the projectors are the quality and shape (square, circular, reflections of windows, shadows of branches) of the light beam. As for the quality, it will depend on the concentration or diffusion of the light, as well as the definition of the margins.

Movement of rgb laser spider moving head light

This is achieved in two ways: physically moving the device or regulating the intensity of the lights. Furthermore, in this way, we can draw attention to a certain area of ​​the scene or achieve an effect.

Colour

Another of the properties that we can control of light is color. This is determined by the type of lamp, its regulation and the filters. In the latter we will take into account the material (dichroics, plastics …) with which they are made, as well as the type of class (neutrals, diffusers, correctors and effect).

Of course, when locating the different rgb laser spider moving head light we will also have to take into account the type of material. Similarly, it comes with the objects that occupy the stage are made. As you can see the light can be controlled with the right tools. However, this is not enough, since you must also have the necessary knowledge to locate them properly.

Why rgb laser spider moving head light is popular?

An industry that invoices 1,400 million pesos a day in one of the countries with the highest number of holidays (18) and a large number of events, fairs and carnivals. Find in the nightlife one of your favorite recreational spaces.

People fully enjoy fun of this type and therefore demand that entertainment sites offer them attractive and impressive sound and visual experiences.

Nightlife companies have understood this and are constantly looking to meet these needs, with technology, creativity and knowledge.

Can you start rgb laser spider moving head light entertainment business?

Therefore, if you plan to start a night rgb laser spider moving head light entertainment business, you must clearly understand a series of criteria before it is achieved.

Following points are important:

• The brand
• the physical space
• the structure
• the concept or the target audience

In our case we can offer you the complete solution in rgb laser spider moving head light. But first you must take into account certain parameters that will focus your ideas, making the most of your investment.

This small guide for disco lighting can give you a focus to acquire the ideal equipment for your club. Moreover, it is to create this guide we are based on the frequent questions we receive from our clients and we hope it will be very useful for the lights of your disco.

What dimensions will the disco rgb laser spider moving head light have?

The first thing you should take into account are the dimensions and physical structure of the nightclub, it is important that you take into account what space is destined for the dance floor, liquor bar, bathrooms, among others.

Essentially the height of the enclosure this greatly influences the purchase of rgb laser spider moving head light. You may wonder why, since it turns out that professional lighting equipment has different levels of light intensity. And it is a bad decision in this part can negatively affect the public. It can be either due to too much intensity (dazzling the view) or too little feeling that the place it lacks life or dynamism.

Theme or concept of the place

The concept that you want to communicate influences the decision to buy the lights, there are discotheques with all kinds of themes and there are lights that are better suited for each of them. Example: it is not the same lighting configuration for an electronic music disco as a crossover disco or one that includes spaces for conversation like a lounge area.

Colors influence the brain, this is an open secret that is heard a lot in marketing and in nightclubs it should be taken into account as well. For example, red transmits strength, vitality, blue calms and white with a strober effect causes dynamism and enthusiasm.

Will it have an artist presentation?

It is important to know about rgb laser spider moving head light if you are going to have a live artist presentation. In addition, artists always require a space that allows them to perform their show close to the public.

But this space must be visible and central for customers to enjoy the event. Artist spaces need mood lighting and other elements that add dynamics to the show. Moreover, keep this in mind for this lighting zone.

Stage lighting design

Everything you need to know about professional moving head lights design: what is its work process and what materials do we need.

Imagine a theatrical, musical or dance show. Imagine it in a theater, big or small, it doesn’t matter. You feel the atmosphere, almost a vibration that runs through your body … And now, to the scene that you are imagining, remove the lighting and put a white, cold, impersonal light.

There you have the key to why stage lighting design is so important in any type of show. It is, without a doubt, one of the points without which we could not create magic.

Keep reading!

What material do we need to create a good stage lighting design?

The spotlight system we have will be decisive when creating our professional moving head lights design. What are some of the items that we are likely to need if we set out to plan a lighting design?

Tracking cannon

We can direct it to emphasize an element or character that is on stage. They can even be robotic systems that do automatic tracking.

Basic lighting

A series of hanging spotlights that surround the stage and that is easy to filter to change the color and tone to our liking. Although until a few years ago they were white light projectors to which a color filter was installed, today most of this type of equipment works with LED technology and any color can be chosen for its operation. 

Spotlight with professional moving head lights

It’s a must-have for concerts and venues, including movement, color changes, gobos (templates with custom shapes like a logo or frame), and effects like strobes.

Ground spotlights

To illuminate from the side of the stage or from the proscenium in an asymmetrical way to illuminate large areas.

Strobe lights

 Ideal for concerts, but also to create atmospheres in theater or dance shows. 

Specific projectors for theater

Without being moving professional moving head lights, a zoom position can be set manually and, thanks to the built-in blades, the light beam can be cut so as not to “smear” any part of the scene.

Lighting control

It is normally a console with several knobs and buttons to program memories that can be activated during the show. These systems are in many cases, a computer together with a USB device that serves as communication between control software and the lighting projectors themselves.

What we must take into account for professional moving head lights?

Theater

In this case, of course, the importance is in seeing the actors, but our lighting can become almost one more character. We will work hand in hand with the creative team to create atmospheres or even spaces using only light.

After all, as professional moving head lights designer you must also study the conflict of the work so that your work is in tune with it. We must bear in mind that a commercial comedy cannot have the same lighting as a Shakespearean drama.

Dance

To illuminate dance performances we have to bear in mind that, above all, our light must focus on the bodies on stage, their movements and how it affects them.

Likewise, it must create an atmosphere in coherence with the proposal of the dancers, making our design almost seem to dance with them.

Concerts

Here the striking, strong, agile lighting effects will predominate and with great variation of colors to catch the spectators. Especially if we have a large space, it will also be good to create professional moving head lights design for the area where the public will be, achieving a greater sense of immersion.

What are the work processes to achieve a stage lighting design?

Like almost all positions in a scenic project, this is not an individual job, but must be in accordance with the one being carried out by the rest of the teams.

It will generally follow the following stages:

1. Reading of the project and pooling of ideas from the different teams that are available: direction, costumes, lighting design, production …

2. Director’s vision. It is, of course, who has the last word in any artistic project and is in charge of giving the guidelines to follow.

3. We will analyze, before we begin, what means we have and what the route will be: a show that is going to do season in a theater, a play that will be on tour or a concert is not the same. We must also know if it will have its own equipment or will it be adapted to the technical endowments of each room.

4. Based on that, we will create the first approach to our stage lighting design.

5. Once approved, we will create our technical sheet by filling in the light direction sheets, effect sheets and the table marking.

How do professional moving head lights work?

Surely you have noticed that on those days when there is more sunlight, the shadows that are projected are clearer. On the other hand, on a cloudy day, the shadows are diffuse and almost disappear. In this way, nature itself provides us with the first distinction, depending on how professional moving head lights work.

Thus we speak of specific direction or of indirect general shape. We can take this performance to the stage, thus turning light control into an art.

Controllable light properties

As we have already mentioned, with the control of light we can obtain multiple effects on a stage. It will allow us to create different atmospheres. Moreover, it happens according to the needs of the theatrical work or show to be represented. These controllable properties of light are:

Summary

This is the amount of light present. It is also called luminosity. This varies depending on the number of bulbs or devices common, their power, the use of devices to regulate them, the distance between objects and professional moving head lights devices, the brightness and saturation of the color filters that interpose in the beam and whether accessories are common to modify the beam shape.