Beam lights are essential equipment in stage lighting, tailored for concerts, events, clubs, and more. Over time, the lamp in a beam light may need replacement due to wear and tear. Follow this step-by-step guideline to ensure a smooth and successful stage lamp replacement for your moving head light. This article is mainly for the NE380/NE290 lamp replacement technology guide.
Before You Begin
Safety First: Turn off the beam light and unplug it from the power source to ensure your safety during the replacement process.
Step 1: Prepare light bulbs for replacement
Identifying the Lamp: Take note of the lamp type and model number. This information is crucial for purchasing the correct replacement lamp. Ensure that the replacement lamp is compatible with your beam light model. Refer to the user manual for guidance.
![](http://i3.wp.com/vltglight.com/wp-content/uploads/2023/12/图片1.png)
Step 2: Opening lantern tomb
Have the necessary tools ready, which include screwdrivers or other tools specified in the user manual. Use the screwdrivers to remove four screws on one side, the same operation on the other side. And then to remove the four screws of the heat dissipation window.
![](http://i2.wp.com/vltglight.com/wp-content/uploads/2023/12/图片2.png)
Step 3: Remove the Old Lamp
Use the screwdrivers to move the right sheet metal, rotate and remove the bulb, and use a plier to unplug the link wire, to take the old lamp out.
![](http://i3.wp.com/vltglight.com/wp-content/uploads/2023/12/WPS拼图1.png)
Step 4: Install the New Lamp
Take out the new light bulb and make the connections. Please pay attention to clamping with a plier to prevent it from loosening. Place the bulb and rotate it. Note that the connection point should be on the lower side.
![](http://i1.wp.com/vltglight.com/wp-content/uploads/2023/12/WPS拼图0-2-1030x325.png)
![](http://i0.wp.com/vltglight.com/wp-content/uploads/2023/12/WPS拼图2-1.png)
Step 5: Install the lantern tomb
Install the heat dissipation window screws, and then install the two body shell screws.
![](http://i0.wp.com/vltglight.com/wp-content/uploads/2023/12/图片11.png)
Step 6: Test the Beam Light
Power On: Plug in the beam light and turn it on to test the new lamp.
Check for Proper Functionality: Ensure the beam light operates as expected, with no flickering or unusual behavior.
Final Tips:
Dispose of Old Lamps Properly: Follow local regulations for disposing of old lamps, which may contain hazardous materials.
Keep Records: Note the date of the lamp replacement for future reference and maintenance schedule.
Following this step-by-step guide, you can confidently replace the lamp in your beam moving head light, ensuring optimal performance and longevity for your lighting equipment.